Frigidaire Appliance Repair in Chicago, IL

Frigidaire has been building American home appliances since 1916 — and when something breaks, our Chicago technicians fix it the same day. We service the full Frigidaire lineup including Gallery and Professional series, and we also repair Kenmore appliances built on the Frigidaire platform (model prefix 417 and 970). All brands, all models, 30-day warranty on every repair.

Book appointment Call: 630-214-1998

200+ Positive Reviews

Warranty On All Repairs

Licensed Technicians

Same-Day Service

What Frigidaire appliances do we repair in Chicago?

Frigidaire has been manufacturing American home appliances since 1916, making it one of the oldest and most trusted appliance brands in the country. At IVAN Appliance Repairs, we service the full Frigidaire lineup — including Frigidaire Gallery and Frigidaire Professional — across Chicago, Elmwood Park, Skokie, Evanston, Oak Park, Niles, and Des Plaines. Frigidaire parts are widely available and repairs are typically completed in a single visit.

‍

Frigidaire refrigerator issues we work with

Frigidaire refrigerators — French door, side-by-side, top-freezer, and bottom-freezer models — are found throughout Chicago and suburban homes. The Gallery and Professional series add premium features like smudge-proof stainless, PureSource Ultra filtration, and custom-temp drawers. Our refrigerator repair technicians diagnose and fix:

Frigidaire refrigerator not cooling or not reaching set temperature
Evaporator fan fault — SY EF error code, refrigerator section warming
Condenser fan fault — SY CF error code, compressor overheating
Defrost system failure — frost buildup on evaporator coils blocking airflow
Ice maker not producing ice, leaking, or freezing over
Water dispenser not working or dispensing slowly
High temperature alarm — H1 or HI code, compartment above safe range
Temperature sensor fault — E1, E2, E3 codes
PureSource water filter system fault or dispenser not flowing

‍

The most popular Frigidaire washer problems we fix

Frigidaire front-load and top-load washers are found throughout Chicago and suburban laundry rooms. Our washer repair technicians fix:

Frigidaire washer not draining or not spinning after cycle
Washer leaking from door seal or bottom
Error codes: E11, E13 (water inlet), E68 (door lock), E21 (drain), E35 (pressure sensor)
Door lock fault — washer will not start or door will not open
Washer drum not turning or making grinding noise
Front-load washer door gasket mold or odor
Control board unresponsive or stuck on error code

‍

Frigidaire dryer problems we repair the most

Frigidaire electric and gas dryers are reliable but share the same sensitivity to vent restrictions as all modern dryers. Our dryer repair technicians service:

Frigidaire dryer not heating or producing only lukewarm air
Dryer taking too long to dry — vent blockage or thermal fuse
Thermal fuse blown — full duct cleaning included in same visit
Drum not spinning — broken belt or worn rollers
Error codes: E68 (door), E4A (thermistor), E64 (heating element)
Gas dryer igniter or valve failure — drum spins but no heat

‍

What Frigidaire dishwasher problems we fix

Frigidaire dishwashers — including Gallery models with OrbitClean spray arm technology — are common in Chicago kitchens. Our dishwasher repair technicians handle:

Frigidaire dishwasher not cleaning dishes properly
Dishwasher not draining or standing water after cycle
Dishwasher not drying dishes — heating element or vent fault
Error codes: E5B, E5D (heating), ER (control board), i30 (leak detected)
Door latch broken or dishwasher not starting
Dishwasher leaking from door or bottom

‍

What Frigidaire oven and range problems do you fix?

Frigidaire gas and electric ranges — including Gallery induction and Professional dual-fuel models — are found in kitchens across Chicago, Elmwood Park, and Skokie. Our oven and range repair technicians fix:

Frigidaire oven not heating or not reaching set temperature
Oven temperature sensor failure — food cooking unevenly
Gas burners not igniting or clicking constantly
Error codes: F10 (temperature runaway), F11 (shorted key), F30/F31 (sensor)
Self-cleaning cycle locked — oven door will not open after clean cycle
Induction cooktop zone not heating or not detecting cookware

‍

Frigidaire and Kenmore — what is the connection?

If you have a Kenmore appliance and the model number begins with 417 or 970, it was manufactured by Frigidaire. This matters for repairs because it means your Kenmore uses Frigidaire parts, Frigidaire diagnostic codes, and Frigidaire repair procedures — not Whirlpool or LG parts, even though it carries the Kenmore name.

Our technicians identify the underlying manufacturer from your model number prefix before any diagnosis begins. If your Kenmore 417 or 970 series washer, dryer, refrigerator, or dishwasher has developed a fault, we approach it exactly the same way we approach a Frigidaire repair — with the correct parts and the correct diagnostic sequence from the start. See our Kenmore appliance repair page for more detail on model number identification.

‍

How long does a Frigidaire appliance repair take in Chicago?

Most Frigidaire appliance repairs are completed in 45 to 90 minutes on the first visit:

Evaporator fan motor replacement (SY EF) — 60–75 minutes
Thermal fuse replacement + full duct cleaning — 60 minutes
Door lock assembly replacement — 30–45 minutes
Ice maker module or inlet valve replacement — 45–60 minutes
Oven temperature sensor replacement — 30–45 minutes
Heating element replacement — 45–60 minutes

‍

Why Chicago homeowners choose IVAN for Frigidaire repairs

Same-day service — Available across Chicago, Elmwood Park, Skokie, Evanston, Oak Park, and surrounding suburbs.
Gallery and Professional expertise — Our technicians service Frigidaire’s premium Gallery and Professional lines regularly, including OrbitClean dishwashers, Gallery induction ranges, and Professional dual-fuel models.
Frigidaire and Kenmore parts in stock — Because Frigidaire manufactures many Kenmore appliances, our Frigidaire parts inventory covers both brands simultaneously.
30-day labor warranty — Every Frigidaire repair comes with a 30-day warranty on all labor performed.
Transparent pricing — We diagnose the problem, explain exactly what needs to be done, and give you a clear written estimate before any work begins.
200+ five-star reviews — Homeowners across Chicago, Elmwood Park, and Skokie consistently rate us 5 stars for speed, professionalism, and honest service.

‍

Book appointment Call: 630-214-1998

Common Frigidaire error codes — what they mean

Frigidaire appliances use alphanumeric error codes to flag specific faults. Here are the most common codes we diagnose on Chicago, Elmwood Park, and Skokie service calls:

SY EF — Evaporator fan circuit fault on refrigerator. The evaporator fan has stopped running or lost communication with the control board. Cold air cannot circulate between the freezer and refrigerator sections. Call us — this code does not self-resolve.
SY CF — Condenser fan circuit fault on refrigerator. The condenser fan has stopped running, causing the compressor to overheat. Stop using the refrigerator and call for service to prevent compressor damage.
H1 / HI — Refrigerator or freezer high temperature alarm. The compartment has exceeded its safe temperature range. Check that the door is fully closed and the condenser coils are clean. If the temperature does not recover within 2 hours, call us.
E1 / E2 / E3 — Temperature sensor fault on refrigerator or freezer. The control board cannot read accurate temperatures and cannot regulate cooling correctly. The sensor needs to be replaced.
E11 / E13 — Washer water inlet or fill fault. Check that water supply valves are fully open. If the code returns, the inlet valve needs to be replaced.
E68 — Washer door lock fault. The door is not locking correctly or the lock assembly has failed. Do not force the door — call us for a same-day replacement.
E5B / E5D — Dishwasher heating element or high temp fault. The wash water is not reaching the correct temperature. The heating element or thermistor needs to be tested and replaced.

If any Frigidaire error code returns after a reset, the underlying component needs to be diagnosed and replaced. A reset clears the display — it does not fix the part.

Other brands we work with

Frequently asked questions — Frigidaire appliance repair in Chicago

How much does Frigidaire appliance repair cost in Chicago?

Most Frigidaire appliance repairs in the Chicago area range from $140 to $380 depending on the appliance and the part required. Frigidaire parts are widely available and less expensive than premium brands, which keeps repair costs competitive. We provide a clear written estimate before any work begins — no hidden fees.

Do you repair Frigidaire Gallery and Frigidaire Professional appliances?

Yes. Frigidaire Gallery and Frigidaire Professional are the brand's premium tiers, featuring stainless steel finishes, smudge-proof coatings, and advanced features like the PowerPlus agitator on washers and TurboWash on some refrigerator models. Our technicians service all Gallery and Professional models regularly across Chicago and the suburbs, and we carry common Gallery and Professional parts on every service vehicle.

My Frigidaire refrigerator is showing SY EF — what does it mean?

The SY EF code means the evaporator fan circuit has failed — the fan that circulates cold air from the freezer into the refrigerator section has stopped running. This results in the refrigerator section warming up while the freezer may still feel cold. This code requires a technician — the fan motor or its wiring harness needs to be tested and replaced. Do not continue running the refrigerator as the compressor will strain trying to compensate.

Do you offer same-day Frigidaire appliance repair in Chicago and Elmwood Park?

Yes. We offer same-day service in Chicago, Elmwood Park, Skokie, Evanston, Oak Park, and most surrounding suburbs. Call (630) 214-1998 or book online and we will confirm your appointment the same morning.

Is it worth repairing an older Frigidaire appliance?

Frigidaire appliances are well-built and most are worth repairing if they are under 10 years old and the repair cost is less than 50% of the replacement value. Frigidaire parts are widely available and affordable, which makes repairs cost-effective even on older units. Our technicians give honest advice — we will tell you directly when replacement makes more financial sense than repair.

My Kenmore appliance shows a Frigidaire part number — can you repair it?

Frigidaire manufactures appliances sold under the Kenmore brand when the model number begins with 417 or 970. If you have a Kenmore appliance with one of these prefixes, it is a Frigidaire-built unit and uses Frigidaire parts and diagnostic procedures. Our technicians identify the underlying manufacturer from your model number and apply the correct diagnosis from the start.

Do you repair Frigidaire French door refrigerators with the PureSource water system?

Yes. We service all Frigidaire refrigerator configurations including French door, side-by-side, top-freezer, and bottom-freezer models, as well as Frigidaire Gallery and Professional series refrigerators with the PureSource Ultra water filtration system and custom-temp drawers.

Do you service all Frigidaire appliance types?

Yes. We service the full Frigidaire lineup including refrigerators, washers, dryers, dishwashers, and ranges — across both standard Frigidaire and the Gallery and Professional series. This includes Frigidaire front-load and top-load washers, electric and gas dryers, and all current Frigidaire range and wall oven models.

Appliance repair technician repairing refrigerator