Professional Maytag Appliance Repair in Chicago, IL

IVAN Appliance Repairs services all Maytag appliances in Chicago, Niles, Park Ridge, Elmwood Park, and surrounding suburbs. We fix Maytag washers, dryers, refrigerators, dishwashers, and ranges with same-day availability and a 30-day labor warranty on every repair.

Book appointment Call: 630-214-1998

200+ Positive Reviews

Warranty On All Repairs

Licensed Technicians

Same-Day Service

What Maytag appliances do we repair in Chicago?

Maytag has built its reputation on durability — the brand’s "Built to Last" promise has made it one of the most trusted names in American homes for over a century. At IVAN Appliance Repairs, we service all Maytag models across Chicago, Niles, Park Ridge, Elmwood Park, Evanston, Oak Park, and Des Plaines. Maytag parts are widely stocked and repairs are typically completed in a single visit.

What Maytag washer problems do you fix?

Maytag top-load and front-load washers — including the Bravos XL, Bravos, Centennial, and Maxima lines. Our washer repair technicians diagnose and fix:

Maytag Bravos XL and Bravos washer making grinding or rumbling noise during spin — drum bearing failure
Washer not spinning, draining, or starting a cycle
Error codes: F5 E3 (lid lock), F8 E1 (water supply), F0 E2 (motor), Sd (suds), F7 E1 (motor speed)
Lid lock fault — washer lid will not lock and cycle will not start
Washer leaking from tub seal or bottom of cabinet
Centennial washer agitator not moving during wash cycle
Maxima front-load washer door seal torn or door not locking
Control board unresponsive or stuck on error code

What Maytag dryer problems do you fix?

Maytag dryers — including the Bravos and Centennial lines. Our dryer repair technicians service:

Maytag dryer not heating or producing only lukewarm air
Dryer taking too long to dry — thermal fuse blown or vent blocked
Thermal fuse replacement — full duct cleaning included in same visit
Dryer drum not turning or making squeaking noise — belt or drum bearing
Error codes: F01 (control board), F02 (keypad), F06 (drive motor), PF (power failure)
Dryer shutting off before clothes are dry — moisture sensor or thermostat fault
Gas dryer igniter or valve failure — no heat on gas models

What Maytag refrigerator problems do you fix?

Maytag refrigerators share the same engineering platform as Whirlpool. Our refrigerator repair technicians fix:

Maytag refrigerator not cooling or not reaching set temperature
Defrost system failure — frost buildup blocking evaporator airflow
Ice maker not producing ice or producing small, hollow cubes
Water dispenser not working or leaking from door
Refrigerator running constantly but food not staying cold
Loud humming or clicking noise from fridge or freezer
Error codes: E0, E1, E2, PO (power outage reset)

What Maytag dishwasher problems do you fix?

Our dishwasher repair technicians handle:

Maytag dishwasher not cleaning dishes on top or bottom rack
Dishwasher not draining or standing water after cycle
Error codes: F8 E4 (water supply), F6 E4 (heating), F7 E1 (motor), 7-1 (drain)
Door latch broken or dishwasher not starting
Dishwasher leaking from door or bottom
Control panel buttons not responding

What Maytag oven and range problems do you fix?

Our oven and range repair technicians fix:

Maytag oven not heating or not reaching set temperature
Oven temperature sensor failure — food cooking unevenly or burning
Gas burners not igniting or clicking constantly after ignition
Electric bake or broil element not heating
Error codes: F1 (control board), F2 (temperature runaway), F3 (sensor open), F5 (door latch)
Self-cleaning cycle locked — oven door will not open after clean cycle

How long does a Maytag appliance repair take in Niles or Park Ridge?

Most Maytag appliance repairs are completed in 60 to 90 minutes on the first visit:

Bravos XL drum bearing replacement — 75–90 minutes
Thermal fuse replacement + duct cleaning — 60 minutes
Lid lock assembly replacement — 30–45 minutes
Ice maker module or inlet valve replacement — 45–60 minutes
Oven temperature sensor replacement — 30–45 minutes

Why Chicago homeowners choose IVAN for Maytag repairs

Same-day service in Niles and Park Ridge — We cover Niles, Park Ridge, Elmwood Park, Evanston, Oak Park, and all surrounding Chicago suburbs.
Maytag Bravos specialists — We have serviced hundreds of Maytag Bravos and Bravos XL washers. We know the failure patterns and carry the parts.
Parts on the truck — We stock bearing kits, lid locks, thermal fuses, inlet valves, and heating elements for most Maytag models.
30-day labor warranty — Every Maytag repair comes with a 30-day warranty on all labor performed.
Transparent pricing — Clear written estimate before any work begins.

Where do we provide Maytag appliance repair near you?

Book appointment Call: 630-214-1998

Common Maytag error codes — what they mean

Maytag appliances use F and E codes to identify specific faults. Here are the most common codes we diagnose on Chicago area service calls:

F5 E3 — Lid lock failure. The lid lock assembly is not engaging. The washer will not start a cycle until it is replaced. Do not force the lid — call us for same-day replacement.
F8 E1 — Water supply fault. The machine is not receiving sufficient water. Check that the inlet hose valve is fully open. If the code returns, the water inlet valve inside the machine has failed.
F0 E2 — Motor or control board fault on Bravos and Maxima washers. Do not continue running the machine — this code requires a technician.
Sd — Excess suds detected. Too much detergent or the wrong detergent type was used. Use HE detergent only and reduce the amount. If the code keeps appearing with correct detergent, the pressure switch may need service.
F01 — Dryer main control board fault. The board needs to be tested and replaced by a technician.
F06 — Dryer drive motor fault. The motor has failed or has a wiring fault. Do not continue running the dryer — call us.
F2 — Oven temperature runaway. The oven has exceeded safe temperature. Stop using the oven immediately and call for service — this is a safety issue.
F3 — Oven temperature sensor open or failed. The oven cannot regulate heat until the sensor is replaced.

If any Maytag error code returns after a reset, the underlying component needs to be diagnosed and replaced. A reset clears the display — it does not fix the part.

Other brands we work with

Frequently asked questions — Maytag appliance repair in Chicago

How much does Maytag appliance repair cost in Chicago?

Most Maytag appliance repairs in the Chicago area range from $150 to $380 depending on the appliance and the part required. Maytag parts are widely available and less expensive than many premium brands, which keeps repair costs reasonable. We provide a clear written estimate before any work begins — no hidden fees.

Do you repair Maytag Bravos XL and Bravos washers in Niles and Park Ridge?

Yes. The Maytag Bravos and Bravos XL top-load washers are among the most common appliances we service in Niles, Park Ridge, and the surrounding Chicago suburbs. The most frequent issue is worn drum bearings that develop a grinding or rumbling noise during the spin cycle. We carry Maytag Bravos bearing kits on the truck and complete most repairs in a single visit.

My Maytag washer is making a loud grinding noise during spin — what is wrong?

A grinding or rumbling noise during spin on a Maytag top-load washer — especially Bravos and Centennial models — almost always indicates worn drum bearings or a failing tub bearing. The noise typically starts quietly and worsens over weeks. Left unrepaired, the bearing failure puts stress on the spin basket and motor. Most Maytag bearing repairs are completed same day.

What does the F5 E3 or F8 E1 error code mean on my Maytag washer?

F5 E3 on a Maytag washer means the door lid lock is not engaging correctly. The washer will not start until the latch is repaired or replaced. F8 E1 means the water supply is not reaching the machine — check that the inlet hose valve is fully open. If the code returns after checking the supply, the inlet valve inside the machine has failed and needs to be replaced.

Do you offer same-day Maytag appliance repair in Niles and Park Ridge?

Yes. We offer same-day service in Niles, Park Ridge, Elmwood Park, Evanston, Oak Park, Des Plaines, and most Chicago neighborhoods. Call (630) 214-1998 or book online and we will confirm your appointment the same morning.

Is it worth repairing an older Maytag appliance?

Maytag appliances are built to last longer than most brands — a well-maintained Maytag washer or dryer can run reliably for 15 years or more. If the appliance is under 10 years old and the repair cost is less than 50% of the replacement value, repair is almost always the better financial decision. Maytag parts are widely available and affordable, which makes repairs cost-effective even on older units.

My Maytag dryer is not heating — what are the most common causes?

The three most common causes of a Maytag dryer not heating are a blown thermal fuse caused by a blocked exhaust vent, a failed heating element, or a faulty cycling thermostat. The thermal fuse is the most frequent culprit — it blows as a safety measure when airflow is restricted. We replace the fuse and clean the full vent duct in the same visit to prevent the issue from recurring.

Do you repair Maytag Centennial, Maxima, and commercial-grade Maytag appliances?

Yes. We service the full Maytag lineup including Maytag Centennial top-load washers, Maxima front-load washers, Bravos XL washers and dryers, Maytag commercial-grade washers for shared laundry spaces, and all current Maytag refrigerator, dishwasher, and range models.

Appliance repair technician repairing refrigerator