Expert Kenmore Appliance Repair in Chicago, IL

IVAN Appliance Repairs services all Kenmore appliances in Chicago, Des Plaines, Morton Grove, and surrounding suburbs. We fix Kenmore washers, dryers, refrigerators, dishwashers, and ranges — including Kenmore Elite and Kenmore Oasis — with same-day availability and a 30-day labor warranty.

Book appointment Call: 630-214-1998

200+ Positive Reviews

Warranty On All Repairs

Licensed Technicians

Same-Day Service

What Kenmore appliances do we repair in Chicago?

Kenmore is one of the most recognized appliance brands in American homes — but unlike Samsung, LG, or Whirlpool, Kenmore does not manufacture its own appliances. Kenmore products are built by Whirlpool, LG, or Frigidaire depending on the model series. At IVAN Appliance Repairs, we service all Kenmore models across Chicago, Des Plaines, Morton Grove, Niles, Park Ridge, Elmwood Park, and Evanston.

‍

What does your Kenmore model number tell us?

110, 665 — Built by Whirlpool. Covers most Kenmore Elite washers, dryers, dishwashers, and refrigerators.
796 — Built by LG. Covers Kenmore front-load washers and some refrigerators.
417, 970 — Built by Frigidaire. Covers Kenmore front-load washers and select refrigerators.
253 — Built by Frigidaire. Covers many Kenmore refrigerators and freezers.

‍

Kenmore washer problems we fix

Our washer repair technicians diagnose and fix:

Kenmore washer not draining or not spinning after cycle
Washer leaking from door seal or bottom of cabinet
Error codes: F21 (long drain), F11 (MCU failure), UL (unbalanced load), F5 E3 (lid lock), Sud (excess suds)
Lid lock or door latch fault — washer will not start
Kenmore Oasis top-load washer not agitating or spinning
Drum making grinding or rumbling noise during spin
Washer fills with water but will not start washing

‍

Kenmore dryer problems we fix

Our dryer repair technicians service:

Kenmore dryer not heating or producing only lukewarm air
Dryer taking too long to dry clothes — thermal fuse or vent blockage
Thermal fuse blown — full exhaust duct cleaning included in same visit
Error codes: E1, E2 (thermistor), F01 (control board), F06 (drive motor)
Drum not turning or making squeaking or thumping noise
Gas dryer igniter or valve failure — drum spins but no heat

‍

Kenmore refrigerator problems we fix

Our refrigerator repair technicians fix:

Kenmore refrigerator not cooling or not reaching set temperature
Defrost system failure — frost and ice buildup blocking evaporator airflow
Ice maker not producing ice, leaking, or freezing over
Water dispenser not working or slow to dispense
Refrigerator running constantly but food not staying cold enough
Loud buzzing, clicking, or humming from fridge or freezer section

‍

Kenmore dishwasher problems we fix

Our dishwasher repair technicians handle:

Kenmore dishwasher not cleaning dishes properly
Dishwasher not draining or leaving standing water after cycle
Error codes: F8 E4, 6-2, 7-1, 8-1
Door latch broken or dishwasher not starting
Dishwasher leaking from door or bottom

‍

Kenmore oven and range problems we fix

Our oven and range repair technicians fix:

Kenmore oven not heating or not reaching set temperature
Oven temperature sensor failure — food burning or undercooking
Gas burners not igniting or clicking constantly
Error codes: F1, F2, F3, F5
Self-cleaning cycle locked — oven door will not open after clean cycle

‍

How long does a Kenmore appliance repair take in Des Plaines or Morton Grove?

Most Kenmore appliance repairs are completed in 45 to 90 minutes on the first visit:

Drain pump replacement (F21 washer error) — 45–60 minutes
Thermal fuse replacement + full duct cleaning — 60 minutes
Lid lock or door latch replacement — 30–45 minutes
Defrost heater or thermostat replacement — 60–75 minutes
Oven temperature sensor replacement — 30–45 minutes

Why Chicago homeowners choose IVAN for Kenmore repairs

Same-day service in Des Plaines and Morton Grove — We cover Des Plaines, Morton Grove, Niles, Park Ridge, Elmwood Park, and all surrounding suburbs.
We know who built your Kenmore — Our technicians identify the actual manufacturer from your model number prefix before the repair begins.
Wide parts availability — Kenmore parts come from Whirlpool, LG, and Frigidaire — all brands we stock regularly.
30-day labor warranty — Every Kenmore repair comes with a 30-day warranty on all labor performed.

‍

Book appointment Call: 630-214-1998

Common Kenmore error codes — what they mean

Because Kenmore appliances are built by Whirlpool, LG, or Frigidaire depending on the model, the error codes vary by manufacturer. Here are the most common codes we diagnose on Chicago area service calls:

F21 — Front-load washer long drain error. The drain pump is taking too long to empty the tub. Check and clean the drain pump filter first — if the code returns, the drain pump needs to be replaced.
F11 — Washer main control unit (MCU) communication fault. The control board has lost communication with the motor control. This code requires a technician — do not continue running the machine.
UL — Washer load imbalance. Redistribute the laundry evenly around the drum. If UL persists on balanced loads, suspension rods or drum bearings may be failing.
Sud — Excess suds detected. Too much detergent or the wrong detergent type was used. Switch to HE detergent and use less. If the code keeps returning with correct detergent, the pressure switch may need service.
E1 / E2 — Dryer thermistor or temperature sensor failure. The dryer cannot regulate heat correctly and may shut off early or overheat. The thermistor needs to be tested and replaced.
F01 — Dryer main control board fault. The board needs to be tested and replaced by a technician.

If any Kenmore error code returns after a reset, the underlying component needs to be diagnosed and replaced. A reset clears the display — it does not fix the part. Because Kenmore parts come from multiple manufacturers, our technicians confirm the correct platform from your model number before ordering or replacing any component.

Other brands we work with

Frequently asked questions — Kenmore appliance repair in Chicago

How much does Kenmore appliance repair cost in Chicago?

Most Kenmore appliance repairs in the Chicago area range from $140 to $380. Because Kenmore appliances are manufactured by Whirlpool, LG, or Frigidaire depending on the model series, parts are widely available and generally less expensive than brand-exclusive components. We provide a clear written estimate before any work begins — no hidden fees.

Who actually manufactures Kenmore appliances, and does it affect the repair?

Yes. Kenmore appliances do not have a single manufacturer — depending on the model number prefix, your Kenmore was built by Whirlpool (prefix 110, 665), LG (prefix 796), or Frigidaire (prefix 417, 970). This affects which parts are used and how the appliance is diagnosed. Our technicians identify the actual manufacturer from your model number before the repair begins, ensuring the correct diagnosis and the right parts.

My Kenmore front-load washer is showing F21 — what does it mean?

The F21 code on a Kenmore front-load washer means the drain is taking too long. First check and clean the drain pump filter — it is located behind a small panel at the front bottom of the machine. If the filter is clear and the code returns, the drain pump has failed and needs to be replaced. This is one of the most common Kenmore front-load washer repairs and is completed same day.

Do you offer same-day Kenmore appliance repair in Des Plaines and Morton Grove?

Yes. We offer same-day service in Des Plaines, Morton Grove, Niles, Park Ridge, Elmwood Park, Evanston, and most Chicago neighborhoods. Call (630) 214-1998 or book online and we will confirm your appointment quickly.

Is it worth repairing an older Kenmore refrigerator?

Kenmore refrigerators manufactured after 2010 are almost always worth repairing if they are under 10 years old and the repair cost is less than 50% of replacement value. Because Kenmore fridges share parts with Whirlpool or Frigidaire, components are affordable and readily available. Our technicians will give you an honest assessment — we will tell you directly if replacement makes more sense.

What does the E1 or E2 error code mean on my Kenmore dryer?

E1 or E2 on a Kenmore dryer usually indicates a thermistor or temperature sensor failure. The dryer cannot regulate heat correctly and may shut off early or overheat. This is a straightforward repair — we test the thermistor, replace it if faulty, and verify proper heating before leaving. Most Kenmore dryer sensor repairs are completed in 45–60 minutes.

Do you repair Kenmore Elite and Kenmore Oasis appliances?

Yes. The key is the model number prefix. Kenmore 110 series and 665 series appliances — including the Elite and Oasis lines — are built by Whirlpool. We service all of these regularly across Chicago and the suburbs. If you have a Kenmore Elite washer, dryer, or refrigerator, call us and we will confirm compatibility before scheduling.

What types of Kenmore appliances do you repair?

Yes. We service Kenmore front-load and top-load washers, electric and gas dryers, French door and side-by-side refrigerators, dishwashers, and gas and electric ranges. This includes Kenmore Elite, Kenmore Oasis, and Kenmore Progressive models across all appliance categories.

Appliance repair technician repairing refrigerator